After completing a leak check (refer to owner’s manual) continue to follow the below instructions for igniting your grill:
- Open the hard cover.
- Check that all burner control knobs are in the off position.
- Turn the LP tank on by slowly turning the tank valve counterclockwise; wait 60 seconds.
- To ignite, start with the burner furthest to the left. Push the burner knob in and turn it counterclockwise to the start/high position, until you hear it "snap” and hold for two seconds.
- Repeat for the remaining burners. If the burners do not ignite, refer to troubleshooting for manually lighting the grill or gas flow in your owner's guide.