The grill will automatically run the shutdown procedure if the grill is still hot. Open the grill lid and wait until the grill has completed the shutdown procedure and completely cooled.
Caution: Do not unplug the grill or power it off during the shutdown procedure.
See the following instructions on how to check the fan’s electrical connection. If the fan is not operating after securing fan connection, contact the Customer Service Representative in your area using the contact information on our website for fan replacement.
To clear the E2 error code from the controller, please follow these steps:
1. When the grill has completed the shutdown procedure and completely cooled, power off the grill and unplug from power source.
2. From the rear of your SmokeFire grill, remove the rear access panel by removing four screws.
3. Check the electrical connection to the fan. Make sure the connector is securely joined to the fan’s connection point.
4. Reinstall the rear access panel.
5. Plug in, power on the grill, and begin a cook to allow the controller to run diagnostics.
6. If the E2 error code still remains on the controller, contact the Customer Service Representative in your area using the contact information on our website for fan replacement.