Plug in your SmokeFire.
Push the SmokeFire power button ON.
Confirm that you have the latest version, and have updated, the Weber Connect app on your phone. The current version for iOS: 0.9.5 Android: 0.9.4
Confirm that you have the latest software version, located in the grill controller About screen: juneOS Lite 1.2 (1394)
Pair your SmokeFire to the Weber Connect app via Bluetooth. Updates will not occur if connected via WiFi.
Ensure that your smartphone is within Bluetooth range for approximately 15 minutes as the update takes place. We suggest leaving your smartphone on the side table, with the app open, for maximum range
After 15 minutes, shut down your grill by navigating to Grill Settings (on the control screen) and enter shutdown mode. Once shut down is complete, the grill will display that it’s safe to turn off your grill. At this time, flip the grill switch off. Once the grill has completely shut down, power SmokeFire back on again for the update to sync to the grill controller.
Once the grill is powered back on, wait one minute, and then navigate to the grill’s About screen.
Check that the Firmware Version is now 04008. It will take up to a minute for the controller version to be reflected.