Load your food evenly onto the skewers before putting together the Rotisserie Skewer Set. Once you’ve done that, slide the handle of the first skewer through bottom hole on the right-side plate. Pinch the end of the handle, then insert it into the slot to the upper left of the hole.
Insert the pointed end of the same skewer into the bottom hole of the left-side plate. Then assemble two more skewers in the next set of holes above the lowest skewer on both sides.
Finish assembling the top three skewers in the same manner.
With the burners off and the grill cool to the touch, install your rotisserie motor and rotisserie shaft onto your grill. Refer to your rotisserie unit’s owner’s guide for all the instructions and safety details. Slide the Rotisserie Skewer Set onto rotisserie unit shaft.
Move the latches over the rotisserie shaft on both ends.
Tighten the locking screws on each end. Be sure to push the skewer set completely forward while tightening. The screws must touch the surface of the rotisserie shaft.
If you are still experiencing issues with the fit of your Rotisserie Skewer Set, please contact customer support.